| Dimensions |
Probe Diameter: 58mm (2
1/4") length: 56mm (2 1/4").
Standard cable length: 5m (16ft.)
Control Box: 121 x 119 x 60mm (4 3/4" x 4 5/8"
x 2 3/8") |
| Principle
of Measurement |
Galvanic cell, self polarizing,
fully temperature compensated. |
| Operating
Conditions |
0 to 40°C |
| Minimum
Flow Requirement |
Dependent on DO and temperature,
typically 1 cm/sec (0.4"/sec). |
| Loop
Power Supply |
Min. 15V DC (max. 50ohm
in loop) to max. 35V DC (max. 1000ohm in loop). |
| Input/Output
Isolation |
1000V RMS input/output. |
| Ranges
Available |
- 0-5ppm (mg/L) or 0-50% Saturation
- 0-10ppm (mg/L) or 0-100% Saturation
- 0-20ppm (mg/L) or 0-200% Saturation
- 0-40ppm (mg/L) or 0-400% Saturation (on request)
|
| Accuracy |
Error less than ±2%
of actual value when measuring temperature is the same
as calibrating temperature (barometric pressure unchanged).
The probe has true zero. Response Time: 90% of end value
within 2 minute. |
